Daisy WinterKleen – Mesh Winter Pool Leaf and Debris Cover – TAN 8 Years p.r. Warranty

2 Point Measuring

We can manufacture your pool cover to exact shape of your pool. 2 point measuring is required. Please see instruction video:

To get Your Daisy WinterKleen Cover manufactured to the shape of your pool please perform 2 point measuring following the these steps and filling out the form below:

1. Chalk mark two points  A and  B at the longest point 200mm from the edge of the pool. ( Record total width and length )
2. Chalk mark and number a series of l points 200mm out from pool edge 1, 2, 3 etc. starting clockwise from A all around to l B about 900mm apart. Closer on tighter curves further apart for straighter edges.
3. Measure the distances from  A to marked all points and record the distance to every chalk marked. eg. A to  1 = 957mm or 95.7 cm
4. Measure the distances from l B to marked l points and record the distance to every chalk marked. eg. B to 1 = 8500mm or 850cm
5. Draw a sketch of the pool outline indicating approximate location of points A and B and the points between.
6. Email to us your measurements in the table below.
7. The same method and measurements will be used to make the cover.

NOTE: This measuring procedure applies only to curvilinear pools. If you measure counter clockwise from ‘A’ the cover will be manufactured upside down.